Amphibious
P4000
| Blagdon Range |
| Amphibious |
| A2500 |
| A3000 |
| A3500 |
| A4000 |
| P2000 |
| P2500 |
| P3000 |
| P3500 |
| P4000 |
| P8000 |
| P9000 |
| Hydratech Multi |
| HTM800 |
| HTM1500 |
| HTM2500 |
| HTM3250 |
| HTM4000 |
| HTM6000 |
| Midipond |
| MDP3500 |
| MDP4500 |
| MDP5500 |
| MDP6500 |
| Minipond |
| MP700 |
| MP900 |
| MP2000 |
| Minipond Feature |
| MPF275i |
| MPF550 |
| Torrent |
| T3000 |
| T4000 |
| T5500 |
| T8000E |
| T10500E |
| Koi Air |
| KA25 |
| KA50 |
| KA65 |
| Pond Air |
| PA1 |
| PA2 |
| Home Page |
Efficient high performance pump designed for continuous use. Original design with filter foam assembly manufactured in the UK since 1983. Considered the most reliable pump in the world. It is a centrifugul pump with a disc shaped remote magnetic impeller movement driven by a watertight asynchronous motor (an AC motor which does not run at synchronous speed). Multifunctional pump options complete with advance "T" design and four fountain display options.
This pump should not be used with the non submersible kit, only P2000 - P3500 are suitable for this.
Order Reference: 1010429 Price: £93.79
All prices include VAT. Orders over £30 are carriage paid (England, Wales and Scottish Lowlands only - see Delivery Charges for surcharges to all other areas). To buy on line click on the "Add to basket" buttons, to view your basket click here. Alternatively make a note of the part numbers of any items that you wish to purchase then click here for ordering instructions.
Optional Extras
Description |
Part Number |
Price |
| In-Pool foam pre-filter | 1012041 | £13.25 |
| Pump cage to eliminate need for frequent cleaning | 1011457 | withdrawn |
| Fountain jet No 4 - 19 holes push fits directly onto flowadjuster code 1018418. Care must be taken to align it properly before pushing it on. | 1020503 | withdrawn |
| Fountain jet No 6 - 13 holes push fits directly onto flowadjuster code 1018418. Care must be taken to align it properly before pushing it on. | 1020701 | withdrawn |
| Fountain jet No 7 - 5 holes push fits directly onto flowadjuster code 1018418. Care must be taken to align it properly before pushing it on. | 1020800 | withdrawn |
| Extendable riser pipe 1/2 inch male thread, 17cm to 28cm length with side outlet, pushes onto flow adjuster. | 1020848 | £7.29 |
| Complete set of fittings as supplied with Amphibious A range of pumps. Fountain heads from this set are not interchangeable with those listed above. Spare parts for this are available. | 1014830 | £25.50 |
| Black anti kink hose to fit flow adjuster or directly to pump, 25mm (1") per metre | 25BAKH | £1.61 |
| Double wire hose clip 25mm (1 inch), each. Material galvanised mild steel, colour may vary due to coating | 25DWHC | £0.69 |
We stock spare parts for this pump click here for details.
This pump will do the following:
- Run a fountain on its own. Max fountain height 230cm. or
- Power just a waterfall - Width 20cm at 1m. or
- Supply sufficient water to a filter for a pond of 4140l (910 gal).
Alternatively this pump with its 'T' piece can be used to power more than one feature:
- A fountain & waterfall at 1m with a width of 14cm or
- A fountain & ornament. or
- A fountain & filter for a 2898l (640 gal) pond.
For information about how to select the correct size pump and see full flow rate details of this pump, please click here.
Maximum Flow
| Head (metres) |
0
|
1
|
2
|
| Litres per hour |
3600
|
2460
|
1500
|
| Gallons per hour |
792
|
541
|
330
|
Maximum Head
4.01m (13'6")
Electrical Specification
230v 50Hz 1ph AC, 104 watts, 0.46 amps, supplied with 10m of cable.
Guarantee
This pump is Guaranteed for 3 years, click here for details.
Azpack Limited, 12 Kernan Drive, Swingbridge Trading Estate, Loughborough,
Leics, LE11 5JF, England.
(01509) 261256