60w 0.27 amps.
Pump Selection Page for spares
This pump is still available, for a replacement click here, for spare parts scroll down.
To reprint instruction manual click here. Requires Acrobat Reader.
|
60w 0.27 amps. Pump Selection Page for spares This pump is still available, for a replacement click here, for spare parts scroll down. To reprint instruction manual click here. Requires Acrobat Reader. |
All prices include VAT. There is an additional charge of £3.50 for orders under £15 and £5.00 for orders under £30 to cover 1st class post, packing and handling (UK only). For orders over £30 click here. Click on the "Add to basket" buttons to buy on line, to view your basket click here. Alternatively make a note of the part numbers of any items that you wish to purchase and then click here for ordering instructions.
Diagram Number |
Description |
Part Number |
Price |
| Super "T" piece. This is the original design which has a single screw controller for the fountain, and a side outlet blocked with a bung. The bung should be removed if the side outlet is required for a filter or waterfall. | 1018401 | withdrawn | |
| Amphibious 'P' range only Jet set comprising: Dual control flowadjuster / 'T' piece and 4 spray heads takes only 25mm (1 | 1018418 | £8.15 | |
| Complete set of fittings as supplied with Amphibious ‘A’ range of pumps and in late 2008 on some of the ‘P’ range of pumps. Some individual spare parts for this set are available click here. Fountain heads from this set are not interchangeable with the original ‘P’ range fittings. | 1014830 | £25.50 | |
| 5 | Impeller assembly (consists impeller,internal 'fixed' collar approx 20mm 'outside diam' and fixed backing plate (which will be black not white) , The Bearing set (see below for description) and 'O' Ring | 1019378 | £33.92 |
| 7, 8, 9 & 10 | Bearing Set (consists centre bolt, metal washer, the 'loose' white collar with curved line (approx 25mm long x 13mm 'outside dia') and white 'shamrock' | 1019552 | £17.33 |
| 3 | O ring | 1018708 | £2.03 |
| 2 | Impeller housing and foot, new design click here for details | 1018807/NEW | £8.99 |
| Impeller housing and foot, older design click here for details | 1018807/OLD | withdrawn | |
| Filter housing ONLY now part of 1010054 below | 1018157 | withdrawn | |
| Filter foam pack (large/small) | 1018647 | £2.74 | |
| Filter back plate ONLY | 1019224 | £2.99 | |
| Filter housing complete with foam and back plate. BLACK or GREY may be supplied | 1010054 | £12.99 |
Description |
Part Number |
Price |
| Pond pump cleaner, removes limescale and dirt deposits, 50g sachet | 1011464 | £2.99 |
| In-Pool foam pre-filter | 1012041 | £13.25 |
| Extendable riser pipe 1/2 inch male thread, 17cm to 28cm length with side outlet, pushes onto flow adjuster. | 1020848 | £7.29 |
| Non return valve only. | 1018104 | withdrawn |
| Non submersible kit, includes specially modified housing/base plate, that replaces existing one, flexible tubing, clips and a non return valve. **SPECIAL OFFER PRICE** (Usual price £46.91) | 1018203 | **£33.92** |
| Black anti kink hose to fit flow adjuster or directly to pump, 25mm (1") per metre | 25BAKH | £1.61 |
| Double wire hose clip 25mm (1 inch), each. Material galvanised mild steel, colour may vary due to coating | 25DWHC | £0.69 |
| Pump cage to eliminate need for frequent cleaning | 1011457 | withdrawn |
| Fountain jet No 3 - 60 holes push fits directly onto flowadjuster 1018418 | 1020404 | withdrawn |
| Fountain jet No 4 - 19 holes push fits directly onto flowadjuster code 1018418. Care must be taken to align it properly before pushing it on. | 1020503 | withdrawn |
| Fountain jet No 5 - 41 holes | 1020602 | withdrawn |
| Fountain jet No 6 - 13 holes push fits directly onto flowadjuster code 1018418. Care must be taken to align it properly before pushing it on. | 1020701 | withdrawn |
| Fountain jet No 7 - 5 holes push fits directly onto flowadjuster code 1018418. Care must be taken to align it properly before pushing it on. | 1020800 | withdrawn |
| 3 step fountain jet 1/2" | 1014014 | withdrawn |
| Brass fountain jet 19 x 1mm hole | 1020206 | withdrawn |
| Brass fountain jet 19 x 2mm hole | 1020305 | withdrawn |
| Extendable volcano fountain jet push fits directly onto flowadjuster code 1018418. Care must be taken to align it properly before pushing it on. | 1020626 | withdrawn |
| Double bell & fountain jet | 1020817 | withdrawn |
| "Lava" bell fountain jet | 1020824 | withdrawn |
| Extendable riser pipe 1/2 | 1020831 | withdrawn |
| Riser Pipe 30 cm, pushes onto code 1018418 only. The fountain head will fit the riser pipe, but it is extremely tight. The best way of doing it is to take the fountain head without screwing on the top piece and turn it upside down so that it sits flat on a flat surface. Then push the riser pipe down on the head. | 1020855 | withdrawn |
Azpack Limited, 12 Kernan Drive, Swingbridge Trading Estate, Loughborough, Leics,
LE11 5JF, England. (01509) 261256