67 Watts
Pump Selection Page for spares
This pump has been discontinued, if you require a replacement pump we can supply a modern Blagdon pump, click here to see the range.
Scroll down for spares.
|
67 Watts Pump Selection Page for spares This pump has been discontinued, if you require a replacement pump we can supply a modern Blagdon pump, click here to see the range. Scroll down for spares. |
All prices include VAT. There is an additional charge of £3.50 for orders under £15 and £5.00 for orders under £30 to cover 1st class post, packing and handling (UK only). For orders over £30 click here. Click on the "Add to basket" buttons to buy on line, to view your basket click here. Alternatively make a note of the part numbers of any items that you wish to purchase and then click here for ordering instructions.
Description |
Part Number |
Price |
| Super "T" piece. This is the original design which has a single screw controller for the fountain, and a side outlet blocked with a bung. The bung should be removed if the side outlet is required for a filter or waterfall. | 1018401 | withdrawn |
| Amphibious 'P' range only Jet set comprising: Dual control flowadjuster / 'T' piece and 4 spray heads takes only 25mm (1 | 1018418 | £8.15 |
Description |
Part Number |
Price |
| Pond pump cleaner, removes limescale and dirt deposits, 50g sachet | 1011464 | £2.99 |
| In-Pool foam pre-filter | 1012041 | £13.25 |
| Pump cage to eliminate need for frequent cleaning | 1011457 | withdrawn |
| Fountain jet No 3 - 60 holes push fits directly onto flowadjuster 1018418 | 1020404 | withdrawn |
| Fountain jet No 4 - 19 holes push fits directly onto flowadjuster code 1018418. Care must be taken to align it properly before pushing it on. | 1020503 | withdrawn |
| Fountain jet No 5 - 41 holes | 1020602 | withdrawn |
| Fountain jet No 6 - 13 holes push fits directly onto flowadjuster code 1018418. Care must be taken to align it properly before pushing it on. | 1020701 | withdrawn |
| Fountain jet No 7 - 5 holes push fits directly onto flowadjuster code 1018418. Care must be taken to align it properly before pushing it on. | 1020800 | withdrawn |
| 3 step fountain jet 1/2" | 1014014 | withdrawn |
| Brass fountain jet 19 x 1mm hole | 1020206 | withdrawn |
| Brass fountain jet 19 x 2mm hole | 1020305 | withdrawn |
| Extendable volcano fountain jet push fits directly onto flowadjuster code 1018418. Care must be taken to align it properly before pushing it on. | 1020626 | withdrawn |
| Double bell & fountain jet | 1020817 | withdrawn |
| "Lava" bell fountain jet | 1020824 | withdrawn |
| Extendable riser pipe 1/2 | 1020831 | withdrawn |
| Extendable riser pipe 1/2 inch male thread, 17cm to 28cm length with side outlet, pushes onto flow adjuster. | 1020848 | £7.29 |
| Riser Pipe 30 cm, pushes onto code 1018418 only. The fountain head will fit the riser pipe, but it is extremely tight. The best way of doing it is to take the fountain head without screwing on the top piece and turn it upside down so that it sits flat on a flat surface. Then push the riser pipe down on the head. | 1020855 | withdrawn |
Azpack Limited, 12 Kernan Drive, Swingbridge Trading Estate, Loughborough, Leics,
LE11 5JF, England. (01509) 261256