This pump has been discontinued, if you require a replacement pump we can supply a modern Blagdon pump, click here to see the range.
Scroll down for spares.
|
This pump has been discontinued, if you require a replacement pump we can supply a modern Blagdon pump, click here to see the range. Scroll down for spares. |
All prices include VAT. There is an additional charge of £3.50 for orders under £15 and £5.00 for orders under £30 to cover 1st class post, packing and handling (UK only). For orders over £30 click here. Click on the "Add to basket" buttons to buy on line, to view your basket click here. Alternatively make a note of the part numbers of any items that you wish to purchase and then click here for ordering instructions.
Diagram Number |
Description |
Part Number |
Price |
| 3,4,5,7,8,9 & 20 | Impeller assembly including bearing set (see below for description) and ‘O’ ring. * DISCOUNTED PRICE * (RRP £64.99) | 1019392 | £49.73 |
| 3 | O ring | 1018715 | £2.59 |
| Filter housing complete with foam and back plate. BLACK or GREY may be supplied. **SPECIAL OFFER PRICE** (RRP £18.69) | 1010061 | **£10.72** | |
| Filter foam pack large/small) to fit housing 1010061 | 1018647 | £3.43 | |
| In-Pool foam pre-filter (dimensions: 8 ¼ inch diameter x 7 ½ inch high (21cm x 19cm) with a 3 ¼ inch (8.5cm) diameter hole) | 1012041 | £15.33 | |
| 7,8,9 & 10 | Bearing Set (consists centre bolt, metal washer, the 'loose' white collar with curved line (approx 25mm long x 13mm 'outside dia') and white 'shamrock'. Available as part of the Impeller | 1019552 | withdrawn |
| Impeller housing and base plate | 1018852 | £11.45 | |
| Filter housing | 1018500 | withdrawn | |
| Filter foam to fit housing 1018500 | 1018630 | withdrawn | |
| Filter back plate | 1019248 | withdrawn |
Description |
Part Number |
Price |
| 1.25" BSP (Female Thread) to 32mm hose. *This part screws directly onto the outlet of the impeller housing | HCF125 | £6.63 |
| Gatevalve F/F 1.25 inch BSP | 1015103 | withdrawn |
| Black anti kink hose, 25mm (1 inch) per metre | 25BAKH | £1.80 |
| Double wire hose clip 25mm (1 inch), each. Material galvanised mild steel, colour may vary due to coating | 25DWHC | £0.81 |
| Black anti kink hose, 32mm (1.25 inch) per metre | 32BAKH | £2.82 |
| Double wire hose clip 32mm (1.25 inch), each. Material galvanised mild steel, colour may vary due to coating | 32DWHC | £0.95 |
| Clear aqua hose 19mm (0.75 inch) | 19CAH | £1.98 |
| Hose clip galvanised mild steel for 19mm tubing, each | 19HCSS | £0.75 |
| Clear aqua hose 32mm (1.25 inch) | 32CAH | £3.29 |
| Hose clip galvanised mild steel for 32mm tubing, each | 32HCSS | £0.81 |
| Pump cage to eliminate need for frequent cleaning | 1011457 | withdrawn |
| 1.25" BSP (Female Thread) to 25mm hose. *This part screws directly onto the outlet of the impeller housing | 1014250 | withdrawn |
| 1.25" BSP (Male Thread) to 25mm hose. *This part screws directly into the inlet of the impeller housing | 1014410 | withdrawn |
| 1.25" BSP (Male Thread) to 32mm hose. *This part screws directly into the inlet of the impeller housing | 1014502 | withdrawn |
| Combined ornament / waterfall kit | 1011440 | withdrawn |
| Brass fountain jet 19 x 2mm hole | 1020305 | withdrawn |
| Double bell & fountain jet | 1020817 | withdrawn |
Azpack Limited, 12 Kernan Drive, Swingbridge Trading Estate, Loughborough, Leics,
LE11 5JF, England. (01509) 261256