200 watts 0.88 amps.
Pump Selection Page for spares
This pump is still available, for a replacement click here, for spare parts scroll down.
To reprint instruction manual click here. Requires Acrobat Reader.
|
200 watts 0.88 amps. Pump Selection Page for spares This pump is still available, for a replacement click here, for spare parts scroll down. To reprint instruction manual click here. Requires Acrobat Reader. |
All prices include VAT. There is an additional charge of £3.50 for orders under £15 and £5.00 for orders under £30 to cover 1st class post, packing and handling (UK only). For orders over £30 click here. Click on the "Add to basket" buttons to buy on line, to view your basket click here. Alternatively make a note of the part numbers of any items that you wish to purchase and then click here for ordering instructions.
Diagram Number |
Description |
Part Number |
Price |
| 5 | Impeller assembly (consists impeller,internal 'fixed' collar approx 20mm 'outside diam' and fixed backing plate (which will be black not white), the bearing set (see below for description) and 'O' ring | 1019392 | £39.07 |
| 3 | O ring | 1018715 | £2.03 |
| 7, 8, 9 & 10 | Bearing Set (consists centre bolt, metal washer, the 'loose' white collar with curved line (approx 25mm long x 13mm 'outside dia') and white 'shamrock' | 1019552 | £17.33 |
| 2 | Impeller housing and base plate | 1018852 | £11.21 |
| Filter housing ONLY withdrawn now part of 1010061 below | 1018517 | withdrawn | |
| Filter foam pack (large/small) | 1018647 | £2.74 | |
| Filter back plate ONLY withdrawn now part of 1010061 below | 1019255 | withdrawn | |
| Filter housing complete with foam and back plate. BLACK or GREY may be supplied **SPECIAL OFFER PRICE** (usual price £16.99) | 1010061 | **£7.50** |
Description |
Part Number |
Price |
| Pond pump cleaner, removes limescale and dirt deposits, 50g sachet | 1011464 | £2.99 |
| In-Pool foam pre-filter (this will fit the pump but will require frequent cleaning due to the high power of the pump) | 1012041 | £13.25 |
| Pump cage to eliminate need for frequent cleaning | 1011457 | withdrawn |
| 1.25" BSP (Female Thread) to 25mm hose. *This part screws directly onto the outlet of the impeller housing | 1014250 | £5.69 |
| 1.25" BSP (Female Thread) to 32mm hose. *This part screws directly onto the outlet of the impeller housing | HCF125 | £5.19 |
| 1.25" BSP (Male Thread) to 25mm hose. *This part screws directly into the inlet of the impeller housing | 1014410 | £3.87 |
| 1.25" BSP (Male Thread) to 32mm hose. *This part screws directly into the inlet of the impeller housing | 1014502 | £5.40 |
| Combined ornament / waterfall kit. Kit consists of a threaded T-Piece which screws directly into the pump housing, with a 32mm hose connector to feed a waterfall (includes a 32mm hose clip suitable for use with 32mm clear aqua hose - not supplied). Also a 19mm hose connector with an in-line gatevalve to control flow to feed an ornament. | 1011440 | £23.49 |
| Gatevalve F/F 1.25 inch BSP. **SPECIAL OFFER PRICE** (Usual price £16.31) | 1015103 | **£10.61** |
| Brass fountain jet 19 x 2mm hole | 1020305 | withdrawn |
| Double bell & fountain jet | 1020817 | withdrawn |
| Black anti kink hose, 25mm (1 inch) per metre | 25BAKH | £1.61 |
| Double wire hose clip 25mm (1 inch), each. Material galvanised mild steel, colour may vary due to coating | 25DWHC | £0.69 |
| Black anti kink hose, 32mm (1.25 inch) per metre | 32BAKH | £2.52 |
| Double wire hose clip 32mm (1.25 inch), each. Material galvanised mild steel, colour may vary due to coating | 32DWHC | £0.69 |
| Clear aqua hose 19mm (0.75"), per metre | 19CAH | £1.49 |
| Hose clip galvanised mild steel for 19mm tubing, each | 19HCSS | £0.65 |
| Clear aqua hose 32mm (1.25"), per metre | 32CAH | £3.40 |
| Hose clip galvanised mild steel for 32mm tubing, each | 32HCSS | £0.72 |
Azpack Limited, 12 Kernan Drive, Swingbridge Trading Estate, Loughborough, Leics,
LE11 5JF, England. (01509) 261256