Maximus 7500 (pre 2005)

180w 0.90 amps

Pump Selection Page for Spares

An updated version of this pump is available. Please click here for details. N.B. If you are considering purchasing a new Maximus pump, to replace your old one, you must look at the New pump page specifications AND RECALCULATE your needs. You should ignore old specifications. Over the history of the Maximus there were three different manufacturers of this brand. Over a period of time some specifications have altered/been carried forward wrongly. It is not sufficient to assume that your old pump will match the new models. The new owners of the Maximus brand have revisited specifications to update and correct them. Your old pump may not be what you think it is!!!

Scroll down for spares.

Available Parts

All prices include VAT. There is an additional charge of £3.50 for orders under £15 and £5.00 for orders under £30 to cover 1st class post, packing and handling (UK only). For orders over £30 click here. Click on the "Add to basket" buttons to buy on line, to view your basket click here. Alternatively make a note of the part numbers of any items that you wish to purchase and then click here for ordering instructions.

No.

Description

Part Number

Price
  Jet set comprising: 1 each 9, 13, 25 and 41 hole fountain jets, 1 x bell jet assembly (1 x bell jet stem, 2 x 100 mm jet extension & 1 x bell jet adapter), 1 x flow adjuster tee piece, 1 plug & 1 each 1/2 inch & 3/4 inch adaptors FJMAXwithdrawn
  100mm (4") jet extension (as supplied with jet set) to raise the fountain head above the surface of the water.FJ4Rwithdrawn
  Impeller - requires factory fitting, if damaged pump must be replaced. Early leaflets supplied with the pumps incorrectly state that this is a serviceable part. - -
3 O-ring Not available -
2 Impeller housing - no longer supplied with a flange as shown in the drawing as it is not required. **SPECIAL OFFER PRICE** (Usual price £8.82)TPBML**£6.99**

Or call 01509 261256
2 Filter cageTFCMLwithdrawn

Optional Extras

Description

Part Number

Price
Pond pump cleaner, removes limescale and dirt deposits, 50g sachet1011464£2.99

Or call 01509 261256
Pre filter foam, fits around the filter cage, for use when operating a fountain, prevents debris from blocking the fountain jet. (This will require frequent cleaning due to the high power of the pump) TMWS40 £7.99

Or call 01509 261256
Fountain jet small bell. **SPECIAL OFFER PRICE** (Usual price £16.99)FJ422070**£9.99**

Or call 01509 261256
Fountain jet star bell. **SPECIAL OFFER PRICE** (Usual price £31.49)FJ472077**£15.99**

Or call 01509 261256
Fountain jet small 3 stageFJ452079withdrawn
Fountain jet star tulip. **SPECIAL OFFER PRICE** (Usual price £20.42)FJ482076**£11.20**

Or call 01509 261256
Fountain jet small tulip.FJ442076withdrawn
Fountain jet small foam.FJ432071withdrawn
Black anti kink hose to fit flow adjuster, 12mm (0.5") per metre 12BAKH £0.99

Or call 01509 261256
Double wire hose clip 12mm (0.5 inch), each. Material galvanised mild steel, colour may vary due to coating12DWHC£0.69

Or call 01509 261256
Black anti kink hose to fit flow adjuster, 19mm (0.75") per metre 19BAKH £1.39

Or call 01509 261256
Double wire hose clip 19mm (0.75 inch), each. Material galvanised mild steel, colour may vary due to coating19DWHC£0.69

Or call 01509 261256
1" BSP Threaded Hosetail for 25mm (1") hose, screws into large tee piece PA261305 withdrawn
Black anti kink hose to fit hosetail, 25mm (1") per metre 25BAKH £1.61

Or call 01509 261256
Double wire hose clip 25mm (1 inch), each. Material galvanised mild steel, colour may vary due to coating25DWHC£0.69

Or call 01509 261256

Azpack
Azpack Limited, 12 Kernan Drive, Swingbridge Trading Estate, Loughborough, Leics, LE11 5JF, England. (01509) 261256