 |
200w 0.88 amps. There is some confusion over the numbering of performance pumps either LP or PP is the same pump. Pump Selection Page for Spares This pump has been discontinued, if you require a replacement pump please select it from the current range. Scroll down for spares. |
All prices include VAT. There is an additional charge of £4.00 for orders under £15 and £6.00 for orders under £30 to cover 1st class post, packing and handling (UK only). For orders over £30 click here. Click on the "Add to basket" buttons to buy on line, to view your basket click here. Alternatively make a note of the part numbers of any items that you wish to purchase and then click here for ordering instructions.
Description |
Part Number |
Price |
| Impeller assembly including bearing set (see below for description) and ‘O’ ring. * DISCOUNTED PRICE * (RRP £77.99) | 1019392 | £59.66 |
| O ring | 1018715 | £3.19 |
| Filter housing complete with foam and back plate BLACK or GREY may be supplied | 1010061 | **£10.72** |
| Filter foam pack (large/small) | 1018647 | £4.19 |
| In-Pool foam pre-filter (this will fit the pump but will require frequent cleaning due to the high power of the pump) | 1012041 | £12.12 |
| Bearing Set (consists centre bolt, metal washer, the 'loose' white collar with curved line (approx 25mm long x 13mm 'outside dia') and white 'shamrock'. Available as part of the Impeller | 1019552 | withdrawn |
| Flow adjusters / hose outlet assembly, 1 inch BSP theaded outlets | PA601200 | withdrawn |
| Impeller housing and base plate BLACK | 1018852 | £11.45 |
| Filter housing ONLY BLACK withdrawn now part of 1010061 | 1018517 | Withdrawn |
| Filter back plate ONLY BLACK withdrawn now part of 1010061 | 1019255 | withdrawn |
Description |
Part Number |
Price |
| 1.25" BSP to 32mm hose. *This part screws directly onto the outlet of the impeller housing | HCF125 | £6.99 |
| Gatevalve F/F 1.25 inch BSP | 1015103 | withdrawn |
| F/F socket 1" BSP | SO1 | £3.09 |
| M/M tube 30cm long 1" BSP. Use with SO1 above to raise fountain jet. **SPECIAL OFFER PRICE** (usual price £9.29) | RP112 | **£1.50** |
| Black anti kink hose, 25mm (1 inch) per metre | 25BAKH | £1.89 |
| Double wire hose clip 25mm (1 inch), each. Material galvanised mild steel, colour may vary due to coating | 25DWHC | £0.56 |
| Black anti kink hose, 32mm (1.25 inch) per metre | 32BAKH | £2.81 |
| Double wire hose clip 32mm (1.25 inch), each. Material galvanised mild steel, colour may vary due to coating | 32DWHC | £0.84 |
| Clear aqua hose 19mm (0.75 inch) | 19CAH | £2.29 |
| Hose clip galvanised mild steel for 19mm tubing, each | 19HCSS | £0.69 |
| Clear aqua hose 32mm (1.25 inch) | 32CAH | £3.91 |
| Hose clip galvanised mild steel for 32mm tubing, each | 32HCSS | £0.76 |
| Fountain jet 20cm (8") bell, screws directly onto supplied flow adjuster PA601200 | FJ372070 | withdrawn |
| Fountain jet 3 stage, screws directly onto supplied flow adjuster PA601200 | FJ402074 | withdrawn |
| Fountain jet tulip, screws directly onto supplied flow adjuster PA601200 | FJ392078 | withdrawn |
| Fountain jet foam, screws directly onto supplied flow adjuster PA601200 | FJ382079 | withdrawn |
| 1.25" BSP to 25mm hose. *This part screws directly onto the outlet of the impeller housing | 1014250 | withdrawn |
| 1.25" BSP to 25mm hose. *This part screws directly into the inlet of the impeller housing | 1014410 | withdrawn |
| 1.25" BSP to 32mm hose. *This part screws directly into the inlet of the impeller housing | 1014502 | withdrawn |
| Combined ornament / waterfall kit | 1011440 | withdrawn |
Azpack Limited, 12 Kernan Drive, Swingbridge Trading Estate, Loughborough, Leics,
LE11 5JF, England. (01509) 261256