2 x 40w
Filter Selection Page for Spares
This filter is still available if you require a replacement click here for details.
Scroll down for spares
|
|
2 x 40w Filter Selection Page for Spares This filter is still available if you require a replacement click here for details. Scroll down for spares |
To reprint instruction leaflet click here. Requires Acrobat Reader. NB some spares code numbers are incorrect on the leaflet - see our listing for correct codes - new leaflet being prepared.
N.B. As from summer 2008 locations of inlet/outlets are as follows and not as in photo shown here:
- Clear multi hose water inlet: Top of one long face.
- Outlet(s) to pond: Top of other long face.
- Outlet lever ball valve for stage 1 De-sludge: Bottom of one short face.
- Inlet for garden hose stage 2 full De-sludge: Top of other short face.
Click here for photos showing new locations
Representative diagram this model has two outlets
All prices include VAT. There is an additional charge of £3.50 for orders under £15 and £5.00 for orders under £30 to cover 1st class post, packing and handling (UK only). For orders over £30 click here. Click on the "Add to basket" buttons to buy on line, to view your basket click here. Alternatively make a note of the part numbers of any items that you wish to purchase and then click here for ordering instructions.
Instruction leaflet wrongly states replacement foams as code FS1500
Description |
Part Number |
Price |
| Ultra Violet tube 40 watt, length (excluding pins) approx 587mm, dia 23mm | UVT40 | £14.99 |
| Quartz sleeve 40 watt, length 575mm, internal dia 27mm, external dia 30mm (NB:- does not include O-Rings, see item code ORL) | QS40 | £29.99 |
| O-rings for quartz sleeve (set of 2) approx internal dia 30mm ext dia 39mm | ORL | £0.99 |
| Electric Tray (Ballast Transformer) includes starter and uv holder clips. N.B. This is a set of 2 x 40 watt wired together | SA903C | £23.27 |
| Filter foam set (for middle section). Set comprises one each coarse, medium & fine each 480 x 272 x 20mm | CP80FFS | £10.99 |
| Filter cartridge blue SET OF 2 (from stage 2 de-sludge section) | CP80FC | £24.99 |
| Flocor pack of approx 440 pieces | FLCDIY | £11.50 |
| 1 ¼ inch male BSP clear multi hosetail to take 19, 25, 32 or 38mm hose | SA1006 | £2.39 |
| Rubber washer to fit 1 1/4 inch BSP male thread. This washer is for use with SA1006 above | SA584 | £0.45 |
| Filter brush 8 inches diameter x 16 inches length | FB816 | £4.99 |
| V-Tech AP-30 (3.5 l/min) Air pump | AP30 | £19.99 |
| Silicone airline tubing CLEAR, internal bore 3mm price per metre | 2559 | £0.38 |
| Air stone 50mm ball shape. (Although the instructions with the pump make reference to 25mm air stones, neither Azpack nor Blagdon can supply these.) | 2875 | £1.32 |
Description |
Part Number |
Price |
| Black anti kink hose, 19mm (0.75 inch) per metre | 19BAKH | £1.39 |
| Double wire hose clip 19mm (0.75 inch), each. Material galvanised mild steel, colour may vary due to coating | 19DWHC | £0.69 |
| Black anti kink hose, 25mm (1 inch) per metre | 25BAKH | £1.61 |
| Double wire hose clip 25mm (1 inch), each. Material galvanised mild steel, colour may vary due to coating | 25DWHC | £0.69 |
| Black anti kink hose, 32mm (1.25 inch) per metre | 32BAKH | £2.52 |
| Double wire hose clip 32mm (1.25 inch), each. Material galvanised mild steel, colour may vary due to coating | 32DWHC | £0.69 |
| Black anti kink tubing 38mm (1.5 inch) per metre | 38BAKH | £3.14 |
| Double wire hose clip 38mm (1.5 inch), each. Material galvanised mild steel, colour may vary due to coating | 38DWHC | £1.29 |
| Pipe push fit 750mm long x 50mm dia | FP2 | £4.05 |
| Tank connector to take 50mm pipe. Does not include rubber washer. See code RW2. | TC2 | £5.29 |
| Through push fit connector 50mm | FTC2 | £4.19 |
| Push fit 90 degree elbow 50mm | FE2 | £3.19 |
| Push fit 'T' piece 50mm | FTP2 | £3.19 |
Azpack Limited, Unit 12 Kernan Drive, Swingbridge Trading Estate, Loughborough, Leics,
LE11 5JF, England. (01509) 261256