Clear Pond 80 Advanced Filter
  3. Clear Pond 80 Advanced Filter

Clear Pond 80 Advanced Filter

£370.55 incl. VAT

This is an advanced 7 stage filter with a high powered UVC and a quick action back flush (De-sludge) system.

The multi chambered design includes filter brushes to catch physical waste. Biological filtration is provided by filter foam cartridges, foam layers and flocor. This provides a mass area for beneficial bacteria which break down harmful toxins.

N.B. Locations of inlet/outlets are as per our photos:

– Clear multi hose water inlet: Top of one long face.
– Outlet(s) to pond: Top of other long face.
– Outlet 1 ½” slide valve for stage 1 De-sludge: Bottom of one short face.
– Inlet for garden hose stage 2 full De-sludge: Top of other short face.

The high powered UVC ensures green water elimination.

SKU CPF80 Categories , Brand:

Extra options

SKUImageNamePriceBuyprice_hsort
WSW22 inch wedge shaped washer£2.72 incl. VAT
2.7195
19BAKHBlack anti kink hose, 19mm (¾ inch) per metre£2.08 incl. VAT
2.079
25BAKHBlack anti kink hose, 25mm (1 inch) per metre£2.43 incl. VAT
2.4255
32BAKHBlack anti kink hose, 32mm (1¼ inch) per metre£3.58 incl. VAT
3.5805
38BAKHBlack anti kink hose, 38mm (1½ inch) per metre£4.50 incl. VAT
4.5045
19DWHCDouble wire hose clip 19mm (¾ inch), each. Material galvanised mild steel, colour may vary due to coating£1.28 incl. VAT
1.281
25DWHCDouble wire hose clip 25mm (1 inch), each. Material galvanised mild steel, colour may vary due to coating£1.47 incl. VAT
1.47
32DWHCDouble wire hose clip 32mm (1¼ inch), each. Material galvanised mild steel, colour may vary due to coating£1.47 incl. VAT
1.47
38DWHCDouble wire hose clip 38mm (1½ inch), each. Material galvanised mild steel, colour may vary due to coating£1.66 incl. VAT
1.659
2670Fresh Start 250ml. * DISCOUNTED PRICE * (RRP £11.49)£8.91 incl. VAT
8.9145
SA1102Moulded 2 inch outlet T-piece includes back nut, washer and outside tightening nut. Fitted in units 2009 onwards. For older models see separate parts FP2, TC2 and FTP2 above£15.75 incl. VAT
15.75
FP2Pipe push fit approx 750mm long x 50mm dia£5.61 incl. VAT
5.607
FTP2Push fit 'T' piece 50mm. NOTE fitted in units up to 2008. For newer models see SA1102 below£6.29 incl. VAT
6.2895
FE2Push fit 90 degree elbow 50mm£5.76 incl. VAT
5.7645
RW2Rubber washer, internal dia 60mm approx. External dia 78mm approx. Will fit 2 inch BSP male threads. £2.27 incl. VAT
2.268
TC2Tank Connector 50mm (includes outside threaded collar, green o-ring, wedge shaped washer, inside tightening nut and washer). NOTE fitted in units up to 2008. For newer models see SA1102 below.£7.34 incl. VAT
7.3395
FTC2Through push fit connector 50mm £5.97 incl. VAT
5.9745

Spare Parts

SKUImageNamePriceBuyprice_hsort
WSW1501.5 inch wedge shaped washer£2.57 incl. VAT
2.5725
2559REEL100m REEL silicone airline tubing CLEAR 3mm internal bore£63.14 incl. VAT
63.1365
SA5811¼ inch M BSP solvent tank connector to fit UV Body Outlet £5.25 incl. VAT
5.25
SA10061¼ inch male BSP clear multi hosetail to take 25, 32 or 38mm hose£4.54 incl. VAT
4.536
UNISB3 way switch box£44.09 incl. VAT
44.0895
SA563¾ inch male BSP push fit 90 degree tank connector/elbow including washer & hexagonal tightening nut (stage 2 de-sludge fitting)£2.84 incl. VAT
2.835
SA567¾ inch push fit pipe (stage 2 de-sludge fitting) length 50cm£2.88 incl. VAT
2.877
SA908ABlack rivet for lid rim now sold in singles£0.61 incl. VAT
0.609
BP150Blanking Plug 1 ½ inch for stage 1 de-sludge£5.04 incl. VAT
5.04
CPF80LClear Pond 80 lid complete. * DISCOUNTED PRICE * (RRP £193.96)£171.81 incl. VAT
171.8115
CPF80RBDouble UV Body inlet (facing forwards) and outlet (facing downwards) on R.H. ends, inlet/outlet 1¼ inch F BSP£55.42 incl. VAT
55.419
FAFS2Electric starter 4 - 65w £2.69 incl. VAT
2.688
SA903CElectric Tray (Ballast Transformer) includes starter, uv holder clips and 3m of pre-wired cable. N.B. This is a set of 2 x 40 watt wired together. * DISCOUNTED PRICE * (RRP £76.69)£69.21 incl. VAT
69.2055
FB816Filter brush approx brush length 400mm x 200mm dia£6.60 incl. VAT
6.6045
CP80FCFilter cartridge blue SET OF 2 (from stage 2 de-sludge section)£41.99 incl. VAT
41.9895
CP80FFSFilter foam set (for middle section). Set comprises one each coarse, medium & fine each 480 x 272 x 20mm. Instruction leaflet wrongly states replacement foams as code FS2000£17.84 incl. VAT
17.8395
OFPMMFilter matting (medium) for straining fine suspended particles. Approx size 685 x 432 x 32 mm£7.86 incl. VAT
7.8645
FLCDIYFlocor pack of approx 440 pieces£28.67 incl. VAT
28.665
MHPMultistage solvent hose tail female (push fit) to take tubing 12,19, 25, 32 & 38mm. This hosetail fits the Stage 1 de sludge slide valve if you require to use tubing to dispose of sludge via this. The hosetail requires gluing with a solvent glue.£4.08 incl. VAT
4.0845
ORLO-rings for quartz sleeve (set of 2) approx internal dia 29mm ext dia 39mm£1.37 incl. VAT
1.365
QS40Quartz sleeve 40 watt, length 575mm, internal dia 27mm, external dia 30mm (NB:- does not include O-Rings, see item code ORL)£33.43 incl. VAT
33.432
SA584Rubber washer, internal dia 40mm approx, external dia 54mm approx. Will fit 1 1/4 inch BSP male threads. £0.99 incl. VAT
0.987
2559Silicone airline tubing CLEAR, internal bore 3mm. We will cut this to the continuous length you require (whole metres only - maximum reel length 100 metres). Price shown is per metre. Silicone tubing is recommended for use with air pumps.£0.78 incl. VAT
0.777
VPSSVASlide valve assembly (stage 1 quick de-sludge fitting). Note: Does not include the hosetail see MHP£33.77 incl. VAT
33.768
SA985Snap garden hose fitting (stage 2 de-sludge fitting)£3.78 incl. VAT
3.78
CP80TTank (including drilled insert)£154.98 incl. VAT
154.98
UVT40Ultra Violet tube 40 watt, length (excluding pins) approx 587mm, dia 23mm£20.30 incl. VAT
20.2965
BCLUV bulb connector/holder only (Wire NOT included). Existing wire pushes directly into bulb connector. Supplied in singles.£2.77 incl. VAT
2.772
SA1061Variflow valve plastic 3/4 inch BSP threads (stage 2 de-sludge fitting) £4.49 incl. VAT
4.494
Description

Performance

Size litres 50,000 25,000
Size gallons 11,000 5,000

Maximum Flow Rate

11,250 litres (2,500 gal) / hour

Dimensions

78 x 58 x 69cm

Outlet Size

50mm (2″) two x outlet push fit pipes supplied length approx 200mm

Inlet Hose sizes

The filter has a multi hose adapter which will accept 19, 25, 32 or 38mm hose (3/4, 1, 1 1/4 or 1 1/2 inch). It is recommended that you use the largest size that will also fit your pump.

UVC

80 Watts fitted with approx 2.5m cable.

Guarantee

This filter is Guaranteed for 1 year, click here for details.